Cluster name:"HUAWEI"
Role:Administrator switch
management vlan id : 10
Cluster multicast MAC address : 0180-c200-000a(default)
Cluster auto-join : disabled
Handshake timer:10 sec
Handshake hold-time:60 sec
IP pool:10.1.1.1/24
No logging host configured
No SNMP host configured
No FTP server configured
No SFTP server configured
cluster-member ftp-timeout: 300 sec(default)
Cluster SNMP NAT capability : enabled
Cluster FTP NAT capability : disabled
There are 2 member(s) in the cluster, and 0 of them are down.
If the cluster is established successfully, you can run the display cluster candidates command
to view information about candidate switches, such as the MAC address and device type.
<HUAWEI_0.Quidway> display cluster candidates
MAC HOP IP PLATFORM
0004-0004-0004 2 S9300
0003-0003-0003 1 S9300
0002-0002-0002 1 S9300
If the cluster is established successfully, you can run the display cluster members command
to view information about member switches, such as the MAC address and device type. Member
switches are in the Up state.
<HUAWEI_0.Quidway> display cluster members
The list of cluster member:
------------------------------------------------------------------------------
SN Device Type MAC Address Status Device Name
------------------------------------------------------------------------------
0 S9300 00e0-fcb8-d6b6 Admin HUAWEI_0.Administrator-1
1 S9300 0018-8267-7f7d Up HUAWEI_1.Member-1
2 S9300 00e0-0003-0003 Up HUAWEI_2.Member-2
8.3 Configuring Advanced HGMP Functions
This section describes how to configure advanced HGMP functions to simplify the management
and maintenance of a basic cluster.
8.3.1 Establishing the Configuration Task
Before configuring advanced HGMP functions, familiarize yourself with the applicable
environment, complete the pre-configuration tasks, and obtain the required data. This can help
you complete the configuration task quickly and accurately.
8.3.2 Adjusting Parameters of the Cluster
To better manage switches in a cluster, you can adjust HGMP parameters as required. Adjustable
parameters include the interval for sending Handshake packets, holdtime of the configuration,
whether to enable candidate switches to automatically join a cluster, aging time of member
switches, multicast address of the cluster, mode of adding management interfaces of the cluster
to a VLAN, and public server and host of the cluster.
8.3.3 Managing Switches in a Cluster Through HGMP
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management 8 HGMP Configuration
Issue 03 (2010-09-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8-19
To Next Page
Loading...
