Huawei Quidway S9300 User Manual

<Quidway> display trapbuffer
Trapping buffer configuration and contents : enabled
Allowed max buffer size : 1024
Actual buffer size : 256
Channel number : 3 , Channel name : trapbuffer
Dropped messages : 0
Overwritten messages : 0
Current messages : 3
#Jul 9 00:28:34 2009 Quidway NQA/4/RTDTHRESHOLD:OID
1.3.6.1.4.1.2011.5.25.111.6.16 NQA entry RTD over threshold. (OwnerIndex=admin,
TestName=jitter)
#Jul 9 00:28:34 2009 Quidway NQA/4/SDTHRESHOLD:OID 1.3.6.1.4.1.2011.5.25.111.6.17
NQA entry OWD-SD over threshold. (OwnerIndex=admin, TestName=jitter)
#Jul 9 00:28:34 2009 Quidway NQA/4/DSTHRESHOLD:OID 1.3.6.1.4.1.2011.5.25.111.6.
18 NQA entry OWD-DS over threshold. (OwnerIndex=admin, TestName=jitter)
# Verify that the NMS can receive the trap message successfully. The displayed information is
not provided here.
----End
Configuration Files
l Configuration file of Switch A
#
sysname SwitchA
#
vlan batch 110 120
#
interface Vlanif110
ip address 20.1.1.1 255.255.255.0
#
interface Vlanif120
ip address 10.1.1.1 255.255.255.0
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 120
port hybrid untagged vlan 120
#
interface GigabitEthernet2/0/0
port hybrid pvid vlan 110
port hybrid untagged vlan 110
#
ospf 1
area 0.0.0.0
network 10.1.1.0 0.0.0.0
#
nqa test-instance test jitter
test-type jitter
destination-address ipv4 30.1.1.2
destination-port 9000
threshold rtd 20
threshold owd-sd 5
threshold owd-ds 5
send-trap rtd
send-trap owd-sd
send-trap owd-ds
#
snmp-agent
snmp-agent local-engineid 000007DB7F00000100007B29
snmp-agent sys-info version v2c v3
snmp-agent target-host trap address udp-domain 20.1.1.2 params securityname
public v2c
snmp-agent trap enable
#
return
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management 6 NQA Configuration
Issue 03 (2010-09-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6-231

Huawei Quidway S9300 Specifications

General

Brand	Huawei
Model	Quidway S9300
Category	Network Router
Language	English