Need help?Do you have a question about the Huawei SmartAX MT800 and is the answer not in the manual?
General| Category | Network Router |
|---|---|
| WAN Interface | GPON |
| GPON Port | 1 |
| LAN Interface | Ethernet |
| Wi-Fi | No |
| Firewall | Yes |
| Power Supply | 12 V DC |
| Operating System | Proprietary |
| Standards | IEEE 802.3, IEEE 802.3u |
| Encryption | WPA, WPA2 |
Explains Network Address Translation (NAT) configuration and rules.
Explains how to configure the firewall for system protection.
Covers the configuration of IP filters to control network traffic.
Explains Quality of Service (QoS) settings for prioritizing network traffic.
Guides on upgrading the device's firmware.
Details the configuration steps for PPPoE connections.
Explains the configuration settings for PPPoA connections.
Covers the configuration for RFC 2684 Bridged Pure Bridge mode.
Details the configuration for RFC 2684 Bridged Static IP mode.
Explains the configuration for RFC 2684 Bridged DHCP mode.
Provides common solutions for hardware and connection issues.
Answers frequently asked questions about device operation and configuration.
To Next Page