50
time that you specify. You can enable or disable use of the black list
using the settings described above.
To view the list of currently blacklisted computers, click the
Black List button at the bottom of the Firewall Configuration page.
The table displays the following information for each entry.
z
Host IP Address: The IP address of the computer that
sent the packet(s) that caused the violation.
z
Reason: A short description of the type of violation. If the
packet violated an IP Filter rule, the custom text from the
Log Tag field will display.
z
IPF Rule ID: If the packet violated an IP Filter rule, this field
will display the ID assigned to the rule.
4.13 IP Filter Configuration
The IP filter feature enables you to create rules that control the
forwarding of incoming and outgoing data between your LAN and the
Internet and within your LAN.
4.13.1 IP Filter Global Settings
The IP Filter Configuration page displays global settings that
you can modify. And the IP Filter rule table shows all currently
established rules.
Click the IP Filter of Advanced Function in the Wizard Column
to set the IP filter.
To Next Page
Loading...
