3
Figure 1-3 Rear panel cable and power connections
z
ADSL: ADSL port, connecting to the splitter.
z
Ethernet: Ethernet port, connecting to PC or hub.
z
Reset: Press this button for 3 seconds to restore the
default setting. This operation will let you lose your custom
setting. Please be careful when using Reset button.
z
Power: Power switch.
z
9V AC 1A: Power input plug.
Note:
There might be different power adapter used in different regions. Please make sure
that your power adapter is in conformity with the sign in the rear panel (9V AC 1A or
9V DC 1A).
1.2.3 External Splitter
Using splitter can reduce disturbance signals in the telephone
line. MT800 has to use an external splitter, which has three ports:
LINE, PHONE and MODEM port.
z
LINE: Connecting to the telephone jack.
z
PHONE: Connecting to the telephone.
To Next Page
Loading...
