6
z
User name, password
2.2 Connecting MT800
2.2.1 Connecting ADSL Line
Simply plug one end of the twisted-pair telephone cable into the
Modem port of the splitter and insert the other end into the ADSL port
on the rear panel of MT800.
Use another telephone cable to connect the splitter and the
Phone Jack in the wall.
2.2.2 Connecting the computer to MT800
Use a straight-through cable to connect your computer and
MT800. You can connect the MT800 directly to a 10/100Base-TX
Ethernet adapter card on your PC with the provided Ethernet cable
as shown in this diagram.
To Next Page
Loading...
Need help?
General
