33
III.
Save
z
Click the Submit button to save the settings in the RAM.
z
To save these configuration changes permanently, enter
the Save & Reboot page, select Save and click Submit
button to save new settings.
Note:
If you change the IP address, you need login in again.
4.6 DHCP Mode Configuration
Click the DHCP Mode of Other Setting in the Wizard Column
to set the DHCP mode. DHCP services that provided by MT800
include: directly provide DHCP service, receive and relay DHCP
service.
I.
None DHCP
The default setting is None, which disable DHCP services. In
this case, ADSL terminal device shall be assigned IP settings
manually or through the DHCP server of LAN or ISP.
Figure 4-12 DHCP mode configuration-None
To Next Page
Loading...
