Huawei SmartAX MT800 - Page 42

32
I.
Configuration page
Figure 4-11 LAN configuration
II.
Parameter explanation
To change the LAN IP address, click the Refresh button and
type in the new settings as described below.
z
LAN IP Address: Type in the IP address for the Ethernet
LAN interface. The default IP address is 192.168.1.1
z
LAN Network Mask: Type in the Subnet Mask for the
Ethernet LAN IP interface. The default Mask is
255.255.255.0


 Note:
The public IP address that ISP assigned is not LAN IP address. The public IP
address identifies the WAN interface that the ADSL router connects to Internet.