30
z
Connect If it is selected, MT800 will automatically
enable the PPP dial connection each time the device
is powered on.
z
Auto Connect
If it is selected, MT800 will
automatically redial after timing out and the
disconnection is executed.
z
Manual
If it is selected, you need to establish the
PPP dial connection manually by clicking on Connect
button.
IV.
Save
z
Click the Submit button to save the settings in the RAM.
z
Click the Submit button to save the settings in the RAM.
z
To save these configuration changes permanently, enter
the Save & Reboot page, select Save and click Submit
button to save new settings.
4.4 ADSL Mode Configuration
Click the ADSL Mode of Other Setting in the Wizard column to
set the ADSL mode. Usually the ADSL mode is set to the default
value
Multimode
, and does not need to be changed. If your ISP
instructs you to change your ADSL settings, choose the appropriate
ADSL mode in this web page.
To Next Page
Loading...
