68
Select the Virtual Circuit and click the Submit button. A
message will appear, informing you whether the loop test succeeded
or failed.
The diagnostics utility will run a series of test to check whether
the device's connections are up and working. This takes only a few
seconds. The program reports whether the test passed or failed. A
test may be skipped if the program determines that no suitable
interface is configured on which to run the test.
4.17 Access Management
4.17.1 User Management
The first time you log into the Web Configuration Manager, use
the default user ID and password (admin and admin).
Figure 4-34 Access management
I.
Change the password
For the default user ID, admin, only the password can be
changed. The method to change the password of admin or users is
described as below:
To Next Page
Loading...
