76
4.19 Save & Reboot
Click the Save & Reboot in Wizard column to specify the
method of restart.
I.
Configuration page
Figure 4-42 Save & Reboot
II.
Parameter explanation
z
Save: Save the current setting into the permanent storage
z
Reboot: A simple reboot: This will put into effect any
configuration changes that have been successfully saved
to flash memory.
z
Factory Setting Reboot: This reboots the device to
default settings provided by your ISP or the manufacturer.
Choosing this option erases any custom settings.
You should select the proper method to restart the system.
To Next Page
Loading...
