9
Chapter 3 Before Configuring
MT800
To configure MT800, you have to connect MT800 to a computer
as shown below. Use the provided straight-through cable.
(1)Computer (2)RJ-45 Ethernet Cable (3)MT800
Figure 3-1 Computer to MT800 connection
3.2 When to Configure the MT800
The factory default settings of MT800 have optimized all
functions, which made it can operate in most conditions of network.
Usually, for the users with simple network topology, the default
setting values can meet their basic requirements and need no
change.
To Next Page
Loading...
