7
(1) Computer (2) RJ-11 Tel Cable (3) Phone (4) RJ-45 Ethernet Cable
(5) Splitter (6) Phone Jack (7) MT800 (8) RJ-11 Tel Cable
Figure 2-1 Computer to MT800 connection
2.2.3 Connecting Ethernet LAN to MT800
MT800 may be connected to any 10/100Base-TX Ethernet port.
When connecting MT800 to any Ethernet device that is capable of
operating at speeds higher than 10Mbps, be sure that the device has
auto-negotiation mode enabled for the connecting port.
Use cross-over cable to connect MT800 and the uplink port of a
switch or hub. Be sure that the cable connecting the LAN to MT800 is
not longer than 100 meters.
To Next Page
Loading...
