Huawei SmartAX MT800 - Page 44

34
II.
DHCP Server
MT800 can be configured as DHCP server of LAN. Then the
ADSL terminal shall provide IP settings for your PC.
Figure 4-13 DHCP mode configuration-DHCP Server
z
Start/End IP Address: The range of IP addresses that
release by DHCP server.
z
Gateway Address: The IP address of gateway for DHCP
server.
z
Status: Show the status of DHCP server.
z
Action(s): Click icon
to modify the added DHCP server;
click icon
to delete an added DHCP server; Click icon
to view the parameters of an existed DHCP server.
III.
DHCP Relay
MT800 can also to be configured to relay DHCP packets, and
the PC shall be assigned IP address automatically.