81
Configurations on MT800
Location Parameters Comments
Operation Mode Select “Enable”.
Encapsulation
The value shall be provided by your ISP.
Usually you can keep the default value:
LLC.
Connection Type Select “PPP”.
PPPoA/PPPoE Select “PPPoE”.
User name and
Password
The values shall be provided by your ISP.
Default Route Select “Enable”.
DNS Select “Enable”.
NAT It is recommended to enable the function of NAT.
DNS It is recommended to have DNS Relay function enabled.
DHCP Mode It is recommended to have DHCP Server function enabled.
Traffic Index It is recommended to set 0.
Configurations on the user’s PC
IP Address and
Network Mask
It is recommended to set the mode as obtaining an IP address
automatically.
DNS
It is recommended to set the mode as obtaining a DNS server’s
IP address automatically.
To Next Page
Loading...
Need help?
General
