Huawei Swisscom B593s User Manual

14
1. Connect CPE cables.
2. Configure the computer's IP address so that the IP addresses of the computer and the
CPE are in the same network segment.
Note:
 The CPE's default IP address is 192.168.1.1, the subnet mask is 255.255.255.0.
 It is recommended that you use the automatically obtained IP addresses for the
computer and domain name system (DNS) server. If you manually configure the
computer IP address, you must set the DNS server IP address to the CPE's IP
address. Otherwise, you will fail to log in to the web management page.
3. Open the browser, and enter http://192.168.1.1 in the address box.
4. Enter the user name and password to log in to the web management page.
Note:
 The default user name is admin.
 The default password is Swisscom_B593s.

Huawei Swisscom B593s Specifications

General

Category	Network Router
4G LTE	Yes
SIM Card Slot	Yes
Data Link Protocol	Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Frequency Band	2.4 GHz
Cellular Protocol	LTE
Ethernet Ports	4
USB Ports	1
Device Type	Wireless Router
4G LTE Speed	Download up to 100 Mbps / Upload up to 50 Mbps
Network Bands	LTE 800/900/1800/2100/2600 MHz
Security	WEP, WPA, WPA2
Power Supply	12V DC