Text Input
7
1
Introduction
phone adds copyright information to these contents
so that they are protected by licenses. In this manner,
the usage of these contents is restricted on terminal
devices.
Settings > Security > DRM Settings. Enter the cor-
rect password of your phone. Then you can perform
DRM.
Text Input
• When you enter texts, numbers, and symbols, the
input indicator on the upper right part of the screen
shows the currently used input. Press Zi to switch
between inputs.
• Press Fn+Zi to use the input auxiliary menu. With
this menu, you can use the predictive input, switch
between input languages, and enter symbols.
Copying and Pasting Texts
1 Hold down A/a and scroll to the required direc-
tion to select texts, or press Ctrl+A to select all
texts.
2 Press Ctrl+C to copy texts, press Ctrl+X to cut
texts, or press Fn+Zi to cut or copy selected
texts.
3 Press Ctrl+V to paste texts. You can also press
Fn+Zi to paste texts.
Using Predictive Input
After the predictive input function is enabled, press
the keys marked with required letters in turn. The pre
-
dictive input function displays the words that comply
with the conditions according to combination rules.
Scroll to the desired words and press the scroll key to
confirm the selection.
English Input
• Press A/a once to switch to the input of uppercase
letters. Press A/a twice to switch to the input of low
-
ercase letters.
• Press Fn and another key to enter the character or
number above the key.
To Next Page
Loading...
