USB
17
5
Connections
using the USB cable: use the PC assistant supplied
with your phone or use the Windows operating sys
-
tem to set the service.
1 Connect your phone and PC with the USB
cable
.
2 Install the PC assistant, follow the guide to com-
plete the install.
3 Ensure the USB device is shown in Device Man-
ager/Port of your PC.
4 Select one of the following methods to set up the
dial-up connection.
• Run the Dial-up Internet on the PC to create the
dial-up connection.
• Create Internet access through the built-in Internet
wizard of the Windows operating system.
Only Windows 2000, Windows XP and Win-
dows Vista are supported.
micro-SD Card Reader
You can read the files saved in the micro-SD card by
using a USB cable.
To use the micro-SD card reader, do as follows.
1 Insert the micro-SD card to your phone.
2 Connect your phone to the PC by using the USB
cable.
3 Change the mode to Micro-SD mode by pressing
the button.
4 Found New Hardware is displayed on your PC,
and an icon for the mobile memory drive
appears.
The function of micro-SD card reader and the
other functions using the USB cable are
incompatible. If you enable the micro-SD card
reader, other functions using the USB cable are
unavailable.
To Next Page
Loading...
