Huawei USG6000E Series - 2.2 USG6510 E-POE

2.2 USG6510E-POE
Device and Auxiliary Materials
Figure 2-3 Appearance and auxiliary materials of the USG6510E-POE
NO TE
● The mounting ears are optional.
● The power cable varies according to the delivery country.
Cable Connection
Connect cables according to Figure 2-4 and power on the device. As device does
not provide a power switch, it starts up immediately after receiving power. When
the SYS indicator on the frontpanel is blinking (once every two seconds), the
device is running and ready for
conguration.
The PoE power supply device must be directly connected to the rewall through a
network cable. For details about PoE power supply parameters, see the
Conguration Guide .
HUAWEI USG6000E Series Quick Start 2 Device Introduction and Cable Connection
Issue 02 (2022-08-22) Copyright © Huawei Technologies Co., Ltd. 7