Huawei USG6000E Series - 2.8 USG6630 E, USG6650 E

Figure 2-15 Appearance and auxiliary materials of the USG6630E, USG6650E
NO TE
● The power cable varies according to the delivery country.
● The model with the BOM number containing "-001" and "-002" have one more OFL
indicator than the model with the BOM number not containing "-001" or "-002". The
silkscreen of the device contains "HiSecEngine", and the distribution of heat dissipation
holes on the front of one model slightly
dier from that of another model. This
document uses the model whose BOM number contains "-001" as an example.
Cable Connection
Connect cables according to Figure 2-16 and power on the device. As device does
not provide a power switch, it starts up immediately after receiving power. When
the SYS indicator on the frontpanel is blinking (once every two seconds), the
device is running and ready for
conguration.
HUAWEI USG6000E Series Quick Start 2 Device Introduction and Cable Connection
Issue 02 (2022-08-22) Copyright © Huawei Technologies Co., Ltd. 19