Huawei Watch D2

To Next Page

To Previous Page

ABPM

xxxx

ABPM

Measure

Blood pressure

xxxx

Blood pressure

SYS

XXX

DIA

XXX

XXXXXX

XXX/XX

3. Once a measurement is complete, the device will automatically deate and display the measurement

result.

Note: Measurement indicators include the 24-hour average value, daytime average value, nighttime average

value, maximum value, minimum value, median, standard deviation, number of measurements, blood pres-

sure load, coe󰀩cient of variation, nocturnal blood pressure dipping, and morning blood pressure surge.

2.8 Stopping a Blood Pressure Measurement

• During a blood pressure measurement, press the Up button or touch the cancel button on the screen to

exit the measurement.

• The system will automatically stop a measurement once it is complete.

Notes:

• If the device does not automatically deate after a blood pressure measurement, please unfasten the

strap.

• To restart or turn o󰀨 the device, press and hold the Up button until the device screen displays restart and

shutdown options and select an option as needed.

• The device can display the results of the last 100 single blood pressure measurements and the last 300

ambulatory blood pressure measurements.

• If the device is restored to its factory settings, all of your data will be deleted. The only way to delete data

is to restore your device to its factory settings.

• In this guide, high pressure refers to systolic blood pressure, and low pressure refers to diastolic blood

pressure.

Huawei Watch D2 - Page 16