Huawei Watch D2 - Page 17

15
2.9 Measurement Irregularities and Solutions
Fault Type Solution
Measurement timeout
If the fault persists after several attempts, contact an authorized Huawei
service center.
Ination outside the
rated range
If the fault persists after several attempts, contact an authorized Huawei
service center.
Ination exception
Check whether the installed airbag is connected improperly and whether it
is damaged.
Unsuitable airbag
Follow the instructions to measure your wrist circumference, install a strap
(including the airbag), and set your wrist circumference correctly.
Slow deation
Remove the device immediately and follow the onscreen instructions or
contact an authorized Huawei service center.
2.10 GUI Abbreviations
Abbreviation Full Form
SYS systolic blood pressure
DIA diastolic blood pressure
cm centimeter
in inch
2.11 Static Pressure Test Mode
This involves dedicated personnel testing the static performance of the device through a stringent
process, after entering the device's static pressure test mode.