6
Note:
y In the editing mode, press Right soft key once to delete the letter on the left of the cursor.
Press and hold Right soft key to delete all the entered letters.
y In the "ABC" or "abc" input mode, press 0 once to enter a space, press 0 for two
consecutive times to enter a "0", and press 0
for three consecutive times to start a new
line.
y In the "ABC" or "abc" input mode, press 1 repeatedly to select and enter the commonly
used punctuations.
Entering English (ABC or abc)
In "ABC" or "abc" input mode, press number keys to enter English letters.
If the letter you want to enter is on the same key as the previous one, you can enter the letter only
after the cursor appears again or after you move the cursor to the next space.
Intelligent Input (eZiEn)
In " eZiEn" input mode, press number keys to enter English words.
1. According to the word to be entered, press the corresponding number keys once, and the FWT
makes out the candidate words.
2. Press / or press * repeatedly to select the word.
3. Press / to confirm your selection. The word is displayed in the input area. Alternatively,
press the 0 key to confirm your selection and enter a space behind the word.
Entering Numbers
In the "123" input mode, press a key labeled with the desired number.
Entering Symbols
1. In any input mode, press the * key to display a symbol list.
2. Press / to scroll up or down the symbol list.
3. Press the corresponding number key to enter the symbol.
Voice Caller ID (Optional)
Supports notifying the incoming call number in voice. In standby mode, you can select Menu >
Settings > Call Settings > Voice Caller ID to enable or disable this function.
Recorder
Guest Announcements
The Guest Announcements is used to store incoming call Records.
1. In standby mode, select Menu > Recorder > Guest Announcements.
2. Press / to select a record. Then, the record is automatically played.
To Next Page
