Page 2 of 25
GET TO KNOW YOUR DEVICE
INSERT YOUR SIM CARD
This device supports a nano SIM card ONLY (4FF).
The SIM card is pre-installed and needs to be activated. You may need this information if you need to
replace or check your SIM card.
1. Locate the SIM tray on the side of the device as shown above.
2. Push the ejector tool into the small hole to open the tray.
3. Insert your SIM card carefully in the rear of the tray.
4. Push the SIM tray back into the device.
5. Note: If you replace the SIM card with the device powered On it will restart.
TIPS
Remember to keep your plastic SIM card holder. It has a record of your SIM card details which you
To Next Page
Loading...
