Huber CC-510w User Manual

Operating manual
CC
27.09.2011
Also for models with natural refrigerants
Valid for:
K12-cc-NR, K15-cc-NR, K20-cc-NR, K25-cc-NR, K6-cc, K6s-cc-NR
variostat cc
ministat 125-cc, ministat 125w-cc
ministat 230-cc, ministat 230w-cc
ministat 240-cc, ministat 240w-cc
CC-405, CC-405w, CC-410wl, CC-415, CC-415wl
CC-505, CC-505wl, CC508, CC-510, CC-510w, CC-515, CC-515w
CC-520w, CC-525w
CC-805, CC-820, CC-820w, CC902, CC-905, CC-905w, CC-906w

Huber CC-510w Specifications

General

Brand	Huber
Model	CC-510w
Category	Thermostat
Language	English

Summary

Foreword

Quick Guide for CC-Thermostats

Initial Operation Checklist

Step-by-step guide for setting up the device for the first time.

Basic Operation and Controls

Explanation of the compact menu, control buttons, and common operations.

Setting Over-temperature Protection

Procedure for adjusting the safety cut-off temperature.

Chapter 1: Safety

Safety Symbols and General Instructions

Explanation of safety symbols, intended use, and general safety rules.

Unit Description and Responsibilities

Overview of the unit's features, operator duties, and responsibilities.

Safety Devices and Environmental Requirements

Details on safety devices, protection, and environmental conditions for operation.

Operating Conditions, Location, and Fluids

Guidelines for operating environment, placement, and thermal fluid selection.

Chapter 2: Electronics and Operation

CC-Pilot and Information Displays

Introduction to the CC-Pilot controller and its various display modes.

Unit Operation Methods

Instructions on operating the unit via menus, rotary knob, or number pad.

Menu Navigation and Functions

Overview of main menus (Compact, Comfort) and their available functions.

Com.G@te Menu and Function Numbers

Details on Com.G@te interface functions and a reference for function numbers.

User Menu Configuration and Selection

How to set up and select custom user menus for personalized operation.

Chapter 3: Setup and Preparation

Power Connection, Startup, and Safety

Steps for electrical connection, initial startup, and essential safety measures.

Water Cooling and Bath Operation

Instructions for water cooling setup and using the unit as a bath thermostat.

Connecting External Systems and Temperature Control

Guidance on connecting external applications and setting up temperature control.

Starting, Ending, Filling, and Purging

Procedures for starting/ending control, filling, and air purging the system.

Draining and Thermal Fluid Management

Steps for draining the unit and changing the thermal fluid.

Chapter 4: Interfaces

Interface Modules Overview

Introduction to RS232/SERIAL, Com.G@te, and Web.G@te interfaces.

RS232/SERIAL and Com.G@te/Web.G@te Functions

Details on RS232/SERIAL, PoKo, ECS, and mutual functions.

Specific Interface Functions

Detailed functions for Com.G@te and Web.G@te interfaces.

Chapter 5: Fault Finding and Maintenance

Messages and Error Display

How warnings, alarms, and system messages are displayed and managed.

Alarm and Warning Codes Reference

Comprehensive list of error codes, their meanings, and recommended actions.

Component Exchange and Remote Control

Procedure for replacing electronics and using the unit as a remote control.

Maintenance and Cleaning Procedures

Instructions for unit cleaning, filter maintenance, and decontamination.

Chapter 6: Taking the Machine Out of Service

Decommissioning and Safety

Safety notices and steps for switching off and draining the unit.

Transport and Disposal

Guidelines for packaging, transporting, and environmentally responsible disposal.

Confirmation Form

Equipment Usage Confirmation

Form to confirm equipment details, fluid used, and cleaning status.