To Next PageTo Next Page
Need help?Do you have a question about the Huber K6-cc and is the answer not in the manual?
General| Brand | Huber |
|---|---|
| Model | K6-cc |
| Category | Thermostat |
| Language | English |
Provides a quick overview and checklist for initial setup and operation of CC-thermostats.
Explains safety symbols used in the manual to indicate danger levels.
Details intended applications and general safety guidelines for proper unit operation.
Details duties of responsible persons, operator requirements, machine operator duties, and work area safety.
Covers safety devices according to DIN 12876, including classification of circulators and baths.
Specifies environmental requirements and additional protection devices for the unit.
Details important operating conditions related to application, viscosity, and flow rate of thermal fluid.
Guides on proper unit placement, stability, and safety around the unit.
Recommends specific thermal fluids and provides guidelines for their selection and use.
Introduces the CC-Pilot controller, its touch screen, keys, and LED displays.
Details the available information displays: graphical, LED temperature, and LED status displays.
Explains the real-time clock, rechargeable battery, and programmable event functions.
Explains the multiple possibilities to operate the machine using various control methods.
Details how to navigate and operate the unit using the rotary knob and key.
Explains how to use the number pad for function selection and value input.
Lists available functions in the Main menu, categorized into Compact and Comfort menus.
Details the functions and parameters available within the Compact menu.
Describes the expanded range of functions accessible through the Comfort menu.
Explains functions related to external control via analogue and digital interfaces.
Lists and explains the meaning of various function numbers (FO to F28).
Guides on setting up and configuring user-specific operational modes and menus.
Explains how to select and operate a configured user menu.
Covers safe power connection, initial start-up, safety instructions, and freeze protection.
Details the preparation and connection procedures for units with water-cooling systems.
Guides on operating the unit as a bath thermostat, considering sample placement and fluid levels.
Explains how to connect external systems like reactors, detailing hose connections and flow direction.
Guides on switching on the unit and setting the over-temperature (OT) switch for safety.
Details setting set-point limits, entering a set-point, and starting temperature control.
Describes the procedure for safely ending temperature control operations.
Provides instructions for filling the unit and purging air from externally closed systems.
Details procedures for draining the machine and changing thermal fluid, including cleaning.
Introduces RS232/SERIAL, Com.G@te, and Web.G@te interfaces and their commands.
Details the RS232/SERIAL interface, wiring diagrams, and communication settings.
Explains mutual functions of PoKo and ECS for Com.G@te and Web.G@te.
Details analogue interface and level socket connections for Com.G@te.
Describes Web.G@te features, Ethernet, USB, and Bluetooth connectivity.
Explains how messages are categorized into warnings and alarms, and how they are displayed.
Details error message categories (hard, soft, warnings) and system messages.
Lists and explains alarm and warning codes, categorizing them by severity and providing actions.
Guides on replacing CC electronics and using the CC-Pilot as a remote control.
Outlines general maintenance tasks, including cleaning cooling fins and water filters.
Details procedures for decontamination, surface cleaning, and plug contact maintenance.
Details safety notices and steps for switching off and draining the unit before decommissioning.
Provides guidelines for safely transporting and properly disposing of the unit.
