10
3. Attach the left panel (J) and right panel (N) to the bottom
panel (P). For both the left and right panels, there are three
screws for the rear panel (L) and four for the bottom panel.
Insert the four bottom panel screws first.
4. Attach the tank stopper (T) to the left panel and the right
panel with 2 screws (AA) on each side as shown.
Hardware Used
3/16-24 x 1/2 in.
Screw
X 14
AA
3
AA
M
J
N
P
Hardware Used
3/16-24 x 1/2 in.
Screw
X 4
AA
4
T
AA
To Next Page
Loading...