5
Tools Needed
Small Adjustable Wrench
(Jaws must open at least 9/16 inch.)
Open-end Wrenches
Flat-blade Screwdriver Phillips Screwdriver
Slip-Joint Pliers Metric Allen Wrenches
Introduction
It is important to read this entire manual before beginning assembly.
If the unit has any parts that are not described in this manual, look for separate “Spe-
cial Instructions” that are supplied with the product.
Do not dispose of the carton and packaging until you complete the assembly of the
unit. This can prevent accidentally discarding parts of the product.
WARNING: Keep small parts away from children during assembly.
NOTE: All of the directions (right, left, front, rear, etc.) in this manual are as seen by
the rider while seated on the unit.
• Assembly
To Next Page
Loading...
Need help?
General
