Need help?Do you have a question about the Hughes & Kettner Access and is the answer not in the manual?
General| Brand | Hughes & Kettner |
|---|---|
| Model | Access |
| Category | Amplifier |
| Language | English |
Summarizes new operational and MIDI capabilities of the V.2.0 software.
Original V.1.0 software application for preset selection using UP/DOWN and footswitches.
New mode simplifying preset recall with substantial ID differences, no CHAIN function.
Displays exact parameter value as a number.
Displays current preset ID number only, not parameter values.
Allows copying single sound presets from one ACCESS unit to another.
Standard operation with no LEDs flashing and preset number in display.
A dot appears in display; current setting must be stored to prevent data loss.
Three dots appear in display; press any preset key to quit.
Preset number and STORE LED flash; use UP/DOWN to scroll, press STORE to save.
GAIN LED flashes, display shows parameter value (001-127).
Functions activated by pressing keys simultaneously with power-on.
An alternative soundmodule offering new sounds and updated circuitry for tone shaping.
Software for administrating presets, creating banks, and exchanging data with Atari ST.
To Next Page