EasyManua.ls Logo

Hughes & Kettner TubeMeister 18 User Manual

Hughes & Kettner TubeMeister 18
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
Manual 1.1
Question and Answer IconNeed help?

Do you have a question about the Hughes & Kettner TubeMeister 18 and is the answer not in the manual?

Hughes & Kettner TubeMeister 18 Specifications

General IconGeneral
Power Output18 Watts
Channels2 (Clean and Lead)
Preamp Tubes2 x 12AX7
Power Tubes2 x EL84
Effects LoopYes
ReverbNo
Inputs1 x 1/4"
Speaker Outputs1 x 8 ohm, 1 x 16 ohm
Red Box DI OutputYes
TypeTube Amplifier
EQ ControlsBass, Mid, Treble
Special FeaturesPower Soak, Red Box DI

Summary

Important Safety Instructions

General Safety Precautions

Crucial advice for safe operation, including electrical hazards, water exposure, and maintenance warnings.

Technology of Tone

TubeMeister Product Line Overview

Introduces the TubeMeister 18 Head, Combo, and 112 Cabinet, highlighting their design philosophy and features.

Pre-Operation Checklist

Connections and Control Features

Front and Rear Panel Layouts

Diagrams illustrating the front and rear panel controls and connections for the TubeMeister 18 Head and Combo.

Tube Safety Control (TSC) Overview

Overview of the Tube Safety Control system, including status indications and manual read-out.

Front Panel Controls: Power and Channels

Front Panel Controls: Tone and Effects

Power Soak Modes and Mains Connection

Standard Setup and Cable Connections

Tube Safety Control (TSC)

TSC Status Indications and Read-Out

Explains automatic LED status indications and the manual procedure for checking tube bias and matching.

Technical Specifications

Related product manuals