Need help?Do you have a question about the Hughes & Kettner TUBEMEISTER Series and is the answer not in the manual?
General| Type | Guitar Amplifier Head |
|---|---|
| Power Output | 18 Watts |
| Channels | 2 (Clean, Lead) |
| Effects Loop | Serial |
| Reverb | No |
| Red Box DI Output | Yes |
| Footswitch | Optional |
| Controls | Gain |
| Speaker Output | 8 Ohm, 16 Ohm |
| Dimensions | 150 mm |
| Tubes | 2x ECC83 (preamp), 2x EL84 (power amp) |
Explains safety symbols like voltage, hot surface, forbidden actions, and general alerts.
Provides crucial advice on usage, placement, maintenance, and environmental conditions for safe operation.
Details the design, sound, and usability of the TubeMeister 5 guitar amplifier head.
Describes the integrated speaker combo version, highlighting its sound output for its size.
Information on the 10" speaker cabinet and its role in reproducing the TubeMeister 5 Head's tone.
Explains the function of front panel controls including POWER/ON, INPUT, DRIVE, GAIN, MASTER, and EQ.
Details on DRIVE, GAIN, MASTER, and BASS, MID, TREBLE for sound sculpting and tonal adjustments.
Information on RED BOX DI output and POWER SOAK for recording and silent play.
Guidance on connecting external speaker cabinets and the mains power supply for proper operation.
To Next Page