Hulkman Alpha 85 - User Manual

USER GUIDE
Model: Alpha 85
Error Code Reason Solution
‘’+’’and ‘’-’’ poles of battery
clips reversed.
Reverse the clips and ensure the correct connection.
Press the Power Button and Flashlight Button simultaneously
for 2-3s to start force output. (Force Start Function)
①Please store it back to where the temperature is
between : 5°F-113°F.
②Please charge the device at room temperature.
The safe mode will be off automatically after 10 minutes
waiting. (Please do not turn off the product during the
process)
The voltage of the car battery
is between 2-8V.
① The product’s operating
temperature is too high. (≥113°F)
② Charge the device at extremely
low or high temperature.
Jump start the battery more than
5 times within 10 minutes, the
product will automatically enter
the safe mode.
ABOUT THE ERROR CODE:
STEPS TO JUMP START YOUR VEHICLE
1.Insert the jumper cable
into the jump starter and
connect the clamps to the
car battery.
2.‘’READY’’ sign shows on
the screen.
3.Start your car engine.
3 steps to fix your problem:
1. Check the clamps connection and the product’s battery is above 20%.
2. Press the Power Button and Flashlight Button simultaneously for 2-3 seconds.
3. The screen will shows “READY”, and go back to start engine ignition.
Warning: When using the Force Start Function, auto-detection and safety features will be disabled.
If the screen doesn’t display anything when you have correctly connected the clamps to your car,
you can use the Force Start Function to enter boost mode.
Why the screen shows nothing when you try to start your car ?
ABOUT THE FORCE START FUNCTION:

Summary

Jump Starting Your Vehicle

Force Start Function

Error Code Explanations

USB-A Output Port Usage

12 V DC Output Port Usage

LED Flashlight Operation

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

The HULKMAN Alpha 85 is a portable jump starter designed to start vehicles and provide power for various devices.

Function Description

The primary function of the Alpha 85 is to jump start vehicles. It features a "READY" indicator on its screen to confirm proper connection before starting the engine. In cases where the screen doesn't display anything despite correct connections, a "Force Start Function" is available to enter boost mode, bypassing auto-detection and safety features.

Beyond jump starting, the Alpha 85 offers multiple output ports for powering other devices:

• USB-A Output Port: For charging USB-compatible devices.
• 12V DC Output Port (Max 15V/10A): For connecting 12V DC appliances via a cigarette lighter socket adapter.
• LED Flashlight: A built-in flashlight with multiple modes for illumination.

Important Technical Specifications

While specific battery capacity in mAh or Wh is not provided, the manual indicates:

• Voltage Range for Car Battery: The device is designed to jump start car batteries with voltages between 2-8V.
• 12V DC Output: Maximum 15V/10A.
• Operating Temperature: The product's operating temperature should ideally be between 5°F and 113°F (approximately -15°C to 45°C).
• Safe Mode: The device enters a safe mode if used more than 5 times within 10 minutes, automatically resetting after 10 minutes.

Usage Features

Jump Starting a Vehicle:

1. Insert the jumper cable into the jump starter.
2. Connect the clamps to the car battery, ensuring correct polarity.
3. Wait for the "READY" sign to appear on the screen.
4. Start the car engine.

Force Start Function: If the screen is blank after connecting clamps:

1. Verify clamps connection and ensure the product's battery is above 20%.
2. Press the Power Button and Flashlight Button simultaneously for 2-3 seconds.
3. The screen will display "READY," allowing engine ignition. Warning: This function disables auto-detection and safety features.

Using the USB-A Output Port:

1. Plug the cable into the USB-A output port.
2. Press the Power Button to initiate charging.

Using the 12V DC Output Port:

1. Plug the 12V cigarette lighter socket adapter into the 12V DC output port.
2. Connect 12V DC appliances to the cigarette lighter adapter.
3. Press the Power Button to supply power.

LED Flashlight:

1. Hold the Flashlight Button for 1-2 seconds to turn on/off.
2. Press briefly to cycle through light modes: 50% Lumen Light → 100% Lumen Light → White Strobe Light → White SOS Light → Red Strobe Light.

Maintenance Features

The manual provides solutions for specific error codes and operational issues:

Error Code: Reversed Polarity

• Reason: "+" and "-" poles of battery clips reversed.
• Solution: Reverse the clips and ensure the correct connection.

Error Code: D2 (Low Car Battery Voltage)

• Reason: The voltage of the car battery is between 2-8V.
• Solution: Press the Power Button and Flashlight Button simultaneously for 2-3 seconds to start force output (Force Start Function).

Error Code: Overheating/Temperature Extremes

• Reason:
  1. The product's operating temperature is too high (≥113°F).
  2. Charging the device at extremely low or high temperatures.
• Solution:
  1. Store the device where the temperature is between 5°F-113°F.
  2. Charge the device at room temperature.

Error Code: Safe Mode (Overuse)

• Reason: Jump starting the battery more than 5 times within 10 minutes.
• Solution: The safe mode will automatically turn off after 10 minutes. Do not turn off the product during this process.

General Maintenance:

• Ensure the product's battery is above 20% for optimal performance, especially when using the Force Start Function.
• Charge the device at room temperature to prevent issues related to extreme temperatures.

Hulkman Alpha 85 Specifications

General

Brand	Hulkman
Model	Alpha 85
Category	Remote Starter
Language	English