Hultafors HDL 80 User Manual

8. Maintenance, storage and transportation
9.1 Scope of delivery HDL 80
1 Laser distance measurement instrument
2 Batteries
1 Belt bag
1 Quick start guide
9.2 ACCESSORIES (optional)
LB laser goggles
TP target plate
Further information on accessories can be found
at www.hultafors.com
9. Scope of delivery and accessories
8.1 Cleaning
• Wipe o the dirt with a so damp cloth.
• Check the outlet openings of the laser
regularly, and gently clean them if necessary.
Do not touch the glass with your fingers.
• Do not use aggressive cleaning agents or
solvents.
• Do not immerse the device into water!
• Clean and dry wet equipment, accessories
and transport containers prior to packaging
them. Only pack equipment again when it is
completely dry.
• Keep plug connections clean and protected
from moisture.
8.2 Storage
8.2.1 GENERAL
• e equipment may only be stored within
the specified temperature limits
(see Chapter
3 / Tech ni c al dat a)
.
• Aer a prolonged storage check the accuracy
of the measuring device before using it.
8.2.2 BATTERIES
• For storage, remove the batteries from the
device.
• e storage should preferably be performed in
a dry environment at room temperature
(see Chapter 3 / Technical data) .
• Protect from moisture and humidity. Dry
wet or damp batteries before the storage, or
respectively before usage.
8.3 Transport
8.3.1 GENERAL
e device may be damaged through strong
vibrations or by falling.
• Never transport the product loosely. Always
use the original packaging or an equivalent
transport container.
• Switch o the measuring device before
transporting it.
• Check the unit for damages before use.
8.3.2 BATTERIES
When transporting or shipping batteries, the
operator is responsible for complying with the
applicable national and international laws and
regulations.
• Before shipping, remove the batteries from the
device.
18 19

Hultafors HDL 80 Specifications

General

Brand	Hultafors
Model	HDL 80
Category	Measuring Instruments
Language	English