TOOL NEEDED FOR ASSEMBLY
STEP 1
PARTS AND TOOLS INCLUDED
1x Basket Assembly
x2
1x Set of Hooks
4x #10 x 5/8” Screw
4x #10 x 1” Screw
Philips Head Screwdriver
Using the template printed on the box, mark where the hooks will be on the bottom of the work
surface. Install the hooks with the arrows pointing to the front of the desk using two screws per
hook of the correct corresponding screw. If using a work surface:
Less than .875” in thickness use the shorter screws (#10 x 5/8”) provided
Greater than .875” in thickness use the longer screws (#10 x 1”) provided
To Next Page
Loading...
