EasyManua.ls Logo

Humanscale eFloat - User Manual

Humanscale eFloat
12 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
INSTALLATION INSTRUCTIONS

Table of Contents

Questions and Answers

  • P
    Paul KirbyJul 27, 2025
    How to fix Humanscale eFloat legs not working?
    • J
      Julie MatthewsJul 27, 2025
      If the legs of your Humanscale Indoor Furnishing are not working, ensure the power cord is securely plugged into the controller. Also, check that the motor cables are properly connected to both the controller and the legs, and that the touchpad is connected to the controller. Poor plug contact can also cause this issue, so ensure all connections are firm. If the problem persists, the controller, leg, or touchpad may be defective, in which case you should replace the Touchpad.
  • B
    Brandon SmithAug 4, 2025
    Why is my Humanscale eFloat Indoor Furnishing table in a tilted position?
    • T
      Tyler RandolphAug 4, 2025
      If your Humanscale Indoor Furnishing table is in a tilted position, it might be overloaded, so remove any excess weight. Also, ensure that the power cord is plugged in.
  • K
    Kristina MillerAug 11, 2025
    Why does my Humanscale eFloat table reverse direction briefly then stop?
    • N
      Nicholas DuncanAug 11, 2025
      If, during travel, your Humanscale Indoor Furnishing table reverses direction briefly and then stops, remove any obstructions from the travel area, as the collision sensor may have been activated.
  • G
    Gabrielle RobbinsAug 19, 2025
    Why doesn't collision trigger collision sensor on Humanscale eFloat?
    • J
      Joshua BookerAug 19, 2025
      The Humanscale Indoor Furnishing table has to move several millimeters before collision detection can occur.

Summary

Safety and Cleaning Instructions

Step 1: Assemble Leg to Top Frame

Step 2: Assemble Top Frame to Work Surface (Humanscale)

Step 2: Assemble Top Frame to Work Surface (Non-Humanscale)

Step 3: Assemble Foot to Leg

Step 4: Mount Smart Controller (Humanscale)

Step 4: Mount Controller and Touchpads (Non-Humanscale)

Step 5: Attach Cables to Controller

Step 6: Turn Table Over

Step 7: First-time Operation

Reset System

Procedure to reset the eFloat table system for initial use.

Digital Touchpad Basic Functions

Moving the Desktop Up and Down

Instructions for moving the desktop using the digital touchpad.

Digital Touchpad Advanced Functions

Storing a Position

How to save a specific desk height position using the memory function.

Recalling a Saved Position Manually

How to retrieve previously stored desk height positions.

Digital Touchpad Advanced Functions (Continued)

Virtual Container Stops

Setting upper and lower movement limits for the desktop.

Troubleshooting

Leg Issues

Controller or Touchpad Issues

Operational and Sensor Issues

Display Error: HOT

Troubleshooting (Continued)

Display Codes

Click Codes

Reset Instructions

Humanscale eFloat Specifications

General IconGeneral
BrandHumanscale
ModeleFloat
CategoryIndoor Furnishing
LanguageEnglish

Related product manuals