Humanware Brailliant - Firmware and Auto Power Off; USB Charge and Sound Settings

HumanWare www.humanware.com
Brailliant User Guide
8
3.5 Firmware
This option displays the device's firmware version.
F i r m w a r e : x . y . z
⡋⠊⠗⠍⠺⠁⠗⠑ ⠱ ⠭⠨⠽⠨⠵
3.6 Auto Power Off (toggle)
This option allows you to set an idle time limit before the unit powers down. You may
select from the following settings: Disabled, 5 minutes, 15 minutes, 30 minutes, 1 hour.
A u t o P o w e r O f f : 1 5 m i n
⡁⠥⠞⠕⠀⡏⠕⠺⠑⠗⠀⡕⠋⠋⠱ ⠂⠢⠀⠍⠊⠝
3.7 USB Charge (toggle)
This option allows you to determine if USB charging is permitted. You may want to set
this option to OFF if you are connected to a laptop running low on battery power.
U S B C h a r g e : o n
⡥⡎⡃⠀⡉⠓⠁⠗⠛⠑⠱ ⠕⠝
3.8 Sound (toggle)
This option allows you to set whether the device can emit sounds.
S o u n d : o n
⡎⠕⠥⠝⠙⠱ ⠕⠝