Electrical system
288
Inspection, care and maintenance
7
License/number plate light “LED”
Fig. 65 License/number plate lighting
1 LED light
2 Fixing screw / nut
3 Connection cable with plug connection
4 License/number plate holder
A defective LED light must be replaced
completely.
Release the screw connections
(Fig. 65/2).
Disconnect the connection cable with
plug connection (Fig. 65/3).
Replace the complete LED light
(Fig. 65/1).
Screw on the new LED light with fixing
screws/nuts.
Connect the connection cable.
License/number plate light
“Standard”
Fig. 66 License/number plate lighting 24 V
1 Fixing screw
2 Light body
3 Lens
4 Light
Release the fixing screws (Fig. 66/1).
Carefully open the light body
(Fig. 66/2).
Remove the lens (Fig. 66/3).
Replace the light (Fig. 66/4).
Insert the lens.
Close the light body.
Screw on the fixing screws.
W - 054
1
2
3
1
4
W - 055
1
2
3
4
To Next Page
