Navigation System Screen
The navigation screen is located in the center of the
instrument panel. See Introduction on page 1-2 for more
information.
P (Power/Volume Knob): Press the power/volume
knob to turn on the audio and navigation systems. Turn
the knob clockwise or counterclockwise to increase
or decrease the volume to the audio system. Press the
knob again to turn off the audio and navigation
systems.
NAV RPT (Navigation Repeat): Press the NAV RPT
key to repeat the current audio navigation prompt.
NAV (Navigation): If you are in a menu and are not on
the map screen, press the NAV key located to the left
of the navigation screen to view the current map
showing vehicle position.
If a route has not been planned, pressing the NAV key
will display the map screen and the following
information:
• North or Heading up symbol in upper left corner
• Time
• Map scale
If a route has been planned, pressing the NAV key will
display the map screen and the following information:
• Number of miles/kilometers between current
vehicle position and the destination
• Estimated travel time to the destination
• Highlighted route or turn-by-turn instructions
You will find more information on each feature found on
a map screen, later in this manual.
2-4
To Next Page
Loading...
Need help?
General
