Getting to Know Your H2
10
Automatic Climate Control
System
In addition to its automatic temperature
control feature, this climate control sys-
tem allows the driver and front passen-
ger to choose separate temperature
settings.
Adjust settings for automatic
operation
• Push the AUTO button (A) and adjust
the temperature knobs (B) to the
desired temperature, to set automatic
air delivery mode, fan speed, A/C and
recirculation functions.
Set same temperature for driver and
front passenger
• Press and hold the AUTO button for
four seconds.
Select air distribution manually
• Press and release the Mode button
(C) until the desired source of air is
indicated on the display.
Manually raise or lower fan speed
• Press the upper or lower portion of
the fan control button (D).
Additional Climate Control System
Functions
(Recirculation): Recirculates
interior air while in Vent or Bi-Level
position. To prevent window fogging,
Recirculation will not operate in the
Defog, Defrost or Floor mode.
(Air Conditioning): Turns the air
conditioning system on or off. The snow-
flake symbol appears on the display
when the air conditioning system is on.
(Defrost): Clears windshield and
front side windows of fog/frost.
(Rear Window Defogger): Clears
rear glass of fog/frost and activates
heated outside rearview mirrors.
See Section 3 of your Owner Manual.
Note: When the climate control system
is off, outside air will continue to enter
the vehicle and will be directed accord-
ing to the mode position selected. This
is normal climate control operation.
ENTERTAINMENT
Audio Systems
Your radio may have a button marked
“H” or “HR” to represent hours and an
“M” or “MIN” to represent minutes.
Set the time
•
Press and hold the hour button until the
correct hour appears on the display.
• Press and hold the minute button
until the correct minute appears on
the display.
Note: The time may be set with the
ignition on or of
f.
ABB
D
C
Hummer H2 2007 A 5/25/06 3:01 PM Page 10
To Next Page
Loading...
Need help?
General
