Need help?Do you have a question about the Humminbird 595C and is the answer not in the manual?
General| Brand | Humminbird |
|---|---|
| Model | 595C |
| Category | Fish Finder |
| Language | English |
Describes the Multi-Media Card (MMC) slot for adding detailed maps to the FishFinder.
Covers Sonar View, Sonar Zoom View, and Big Digits View for sonar display.
Includes Bird's Eye View, Chart View, and Combo View for navigation.
Allows selection between North-Up or Course-Up orientation for Chart and Combo Views.
Displays real-time sonar returns from the bottom, structure, and fish.
Details depth, temperature, timer, distance, and speed readouts.
Explains second sonar return, cursor dialog box, and intensity returns.
Describes fish symbols, structure, and RTS® window.
Allows selection of North-Up or Course-Up display orientation.
Describes how to move the chart around the display using the cursor keys.
Explains how to use the plus/minus keys to zoom in and out on the chart.
Details how to get information about chart objects near the cursor.
Covers storing positions, creating paths, and recording movement history.
Instructions for managing waypoints, including saving current position.
Guides on setting a destination and starting navigation.
Explains how to add visual targets or grids to waypoints.
Details how to save a route while navigating.
Explains how to access the main Routes menu.
Guides on creating a new route by adding waypoints.
Instructions for modifying existing routes and waypoints.
Explains how to remove saved routes from memory.
Guides on selecting and navigating a saved route.
Provides information about route waypoints, distance, and bearing.
Details how to save the current track being displayed.
Explains how to clear the current track and start a new one.
Turns the FishFinder on/off and adjusts backlight/background color.
Cycles through all available display views.
Displays information about chart objects or menu options.
Accesses the menu system for settings and configuration.
Controls cursor movement, menu selection, and view freezing.
Marks the current position or cursor position as a waypoint.
Initiates navigation to a selected waypoint.
Adjusts the scale of navigation or sonar zoom views.
Cancels alarms, exits menus, or removes the cursor.
Describes on-water operation with a connected transducer.
Allows learning the FishFinder's functions without actual use.
Displays system connections and performs self-tests.
Menu accessed during power-up for initial setup choices.
Accesses initial setup choices during power-up.
Provides quick access to frequently-used settings.
Organizes settings into categories like Alarms, Sonar, Setup, Views.
Adjusts the detail shown on the sonar display.
Sets the shallowest depth range displayed on Sonar Views.
Sets the deepest depth range displayed on Sonar Views.
Determines how fast sonar information moves across the display.
Selects method for representing bottom and structure (Structure ID/WhiteLine).
Sounds when depth becomes equal to or less than the set value.
Sounds when fish detected match alarm criteria.
Sounds when input battery voltage drops too low.
Sounds when water temperature reaches the set point.
Sounds if the boat moves too far off course.
Sounds when the boat reaches the destination waypoint.
Sounds if the boat drifts outside its anchored perimeter.
Selects the pitch of the alarm sound.
Selects units of measure for depth readouts.
Selects units of measure for temperature readouts (Intl. Models).
Selects units of measure for distance readouts.
Selects units of measure for speed readouts.
Switches between Normal and Advanced modes for menu options.
Selects the display language for menus (Intl. Models).
Troubleshoots issues related to the unit not powering on.
Addresses problems with transducer detection and simulator mode.
Lists common display issues and their potential causes and solutions.
Guides on identifying and resolving sources of electronic noise interference.
Connects handheld or NMEA GPS devices to the FishFinder.
To Next Page
