Need help?Do you have a question about the Humminbird 515 and is the answer not in the manual?
Displays historical sonar returns with depth, temperature, and speed.
Turns the unit on/off and adjusts display backlight/contrast.
Cycles through all available display views.
Accesses the menu system for settings and configurations.
Navigates menus and adjusts settings using directional keys.
Cancels alarms, exits menus, or cycles through views.
Selects Normal operation, Simulator, or System Status at power up.
Provides quick access to frequently used settings without full navigation.
Organized tabs (Alarms, Sonar, Setup) for accessing specific menu settings.
Controls display detail by adjusting sonar return detection.
Steps to resolve problems when the unit does not power on.
Troubleshoots unit defaulting to simulator with transducer connected.
Displays historical sonar returns with depth, temperature, and speed.
Turns the unit on/off and adjusts display backlight/contrast.
Cycles through all available display views.
Accesses the menu system for settings and configurations.
Navigates menus and adjusts settings using directional keys.
Cancels alarms, exits menus, or cycles through views.
Selects Normal operation, Simulator, or System Status at power up.
Provides quick access to frequently used settings without full navigation.
Organized tabs (Alarms, Sonar, Setup) for accessing specific menu settings.
Controls display detail by adjusting sonar return detection.
Steps to resolve problems when the unit does not power on.
Troubleshoots unit defaulting to simulator with transducer connected.
General| Display Type | FSTN LCD |
|---|---|
| Transducer Frequency | 200/83 kHz |
| Sonar Coverage | 20° & 60° @ -10db |
| Target Separation | 2.5 inches |
| GPS | No |
| Water Resistance | Yes |
| Sonar Frequency | 200 kHz |
| Sonar Type | DualBeam |
| Display Size | 5 inch |
To Next Page