Need help?Do you have a question about the Humminbird 700 Seris and is the answer not in the manual?
General| Brand | Humminbird |
|---|---|
| Model | 700 Seris |
| Category | Fish Finder |
| Language | English |
Explains QuadraBeam PLUS™ sonar with its wide 90° area of coverage and multiple beams.
Details WideSide® sonar, a specialized side-looking transducer for bank fishing.
Covers Universal Sonar 2, integrated into Minnkota trolling motors for enhanced views.
Explains the significance of the display and how sonar returns are plotted.
Describes the RTS Window, showing depth and intensity of sonar returns.
Details how to freeze the sonar display and use the active cursor for analysis.
Explains how the unit charts depth changes to create a bottom contour profile.
Presents a historical log of sonar returns on the right side of the window.
Provides a magnified view of the bottom and structure for detailed analysis.
Displays sonar data from side-looking beams for wider coverage.
Shows information from WideSide® transducer's left, right, and down beams.
Details the functions of the POWER/LIGHT, VIEW, MENU, and cursor control keys.
Menu to select operation modes like Normal, Simulator, or System Status.
Provides a shortcut to frequently-used settings, corresponding to the current view.
Displays results from the internal diagnostic self-test, including serial numbers.
Lists the accessories currently connected to the system.
Provides shortcuts and navigation tips for using the Main Menu effectively.
Allows users to simplify or expand menu options by setting the system to Normal or Advanced.
Controls how much detail is shown on the display by adjusting sonar sensitivity.
Sets the shallowest depth range displayed on various sonar views.
Sets the deepest depth range that will be displayed by the unit.
Selects the method used to represent bottom and structure on the display.
Sets the magnification level for the Sonar Zoom View.
Sounds when the depth becomes equal to or less than the set depth.
Sounds when the input battery voltage drops below the set threshold.
Sets which sonar returns from the transducer will be displayed on the screen.
Interprets sonar returns and displays a Fish Symbol when requirements are met.
Changes the sensitivity of the 83 kHz beam for better target detection.
Adjusts the sensitivity of the 455 kHz beam, typically for QuadraBeam PLUS™.
Adjusts the sensitivity of the WideSide® beam.
Allows choosing which connected transducer the system will use.
Selects units of measure for all depth-related readouts.
Selects units of measure for speed-related readouts.
Resets ALL menu settings to their factory defaults.
Sets individual digital readouts on the Sonar View for display.
Adjusts digital depth readout to indicate depth from waterline or boat's keel.
Turns the NMEA output on or off for connecting to compatible devices.
Guides users through checks if the fishing system fails to power on.
Troubleshoots issues where the system defaults to Simulator mode unexpectedly.
Helps identify sources of electrical or hydrodynamic noise affecting sonar reception.
Details the QuadraBeam PLUS™ transducer for specialized sonar functions.
Connects the system to a PC for software updates and features.
To Next Page