Need help?Do you have a question about the Humminbird AS GR50 and is the answer not in the manual?
General| Brand | Humminbird |
|---|---|
| Model | AS GR50 |
| Category | GPS |
| Language | English |
Explanation of GPS signal reception, triangulation, and accuracy.
How the magnetic compass provides heading data and its compensation.
Key considerations for selecting an optimal sensor mounting spot.
Instructions for mounting the sensor on a stem or antenna pole.
Mounting the sensor on a deck with the cable routed through the surface.
Mounting the sensor on a deck with the cable routed to the side.
Securing the sensor base onto the stem pipe.
Positioning the sensor for accurate compass readings, parallel to keel.
Positioning the sensor and marking pilot hole locations.
Connecting the sensor to HELIX units via the COM port.
Connecting the sensor to SOLIX units using a splitter data cable.
Verifying GPS reception and status using the diagnostic view on HELIX.
Checking GPS reception and sensor activity on SOLIX displays.
Turning on NMEA output for data communication with other devices.
Configuring compatible baud rates between the control head and connected devices.
Verifying heading sensor accuracy by setting the North Reference to Magnetic.
Comparing digital heading readout with Course Over Ground (COG) for accuracy.
Checking heading accuracy by comparing with COG in the SOLIX Sonar View.
To Next Page