31
Views
Display the Next/Previous View
Next View: Press the VIEW key repeatedly until the view you want is displayed on-screen.
Previous View: Press the EXIT key repeatedly until the view you want is displayed on-screen.
Display a Saved View
1. Press a VIEW SHORTCUT key.
You can save one view on each VIEW SHORTCUT key. See Save a View to a VIEW SHORTCUT key for more information.
Show your Favorite Views
You can display or hide any view so that each time you press the VIEW key, only your favorite views are displayed on the screen. You
can also use the Views tab to see the list of views available on your control head. The available views are determined by your control
head model, installed transducer, and connected accessories.
Show/Hide a View
1. Main Menu: Press the MENU key twice.
2. Select the Views tab.
3. Select a view.
4. Select Hidden or Visible.
Hide Sonar Views
If you’re using your control head for GPS/Navigation functions only, use these
instructions to hide all sonar views from the view rotation. This setting also
deactivates sonar.
1. Press the POWER key.
2. Select Sonar.
3. Select Off.
NOTE: You can also turn on/off Sonar from the Main Menu > Setup tab > Sonar.
Save a View to a VIEW SHORTCUT key (HELIX 8, 9, 10, 12 only)
Another way to display your favorite views quickly is to save them on the VIEW SHORTCUT keys. You can program the VIEW SHORTCUT
keys to display a saved view immediately. You can save one view on each key.
With the view you want to save displayed on-screen, press and hold one of the VIEW SHORTCUT keys for several seconds.
Main Menu: Views Tab
To Next Page
Loading...
General
