How to fix Hunter Douglas Silhouette Duolite UltraGlide vanes that do not open when the shading is first operated?
Make sure the front shading is completely lowered and the back panel is fully raised. Open and close the Hunter Douglas shading several times to help open the vanes.
How to fix Hunter Douglas Window Blinds vanes that do not close fully?
If this distance is excessive or moves over time, open the Hunter Douglas shading to its full “vane open” position and try again.
How to fix Hunter Douglas Window Blinds front sheer fabric clinging to the rear sheer fabric?
Lightly apply a static spray for home furnishings to your Hunter Douglas blinds. Follow the manufacturer’s directions.
General| Brand | Hunter Douglas |
|---|---|
| Model | Silhouette Duolite UltraGlide |
| Duolite Feature | Yes |
| Operation | UltraGlide |
| Material | Fabric |
| Light Control | Adjustable |
| View Through | Adjustable |
Overview of shading components and system types.
Lists necessary tools and fasteners for installation.
Outlines the four main steps for installing the shading.
Instructions for mounting installation brackets for inside and outside mounts.
Defines mounting types and window casing terms.
Detailed steps for mounting brackets for inside window mounts.
Detailed steps for mounting brackets for outside window mounts.
Explains required clearance for spacer blocks and extension brackets.
Install the battery wand for PowerView/SoftTouch systems.
Instructions for installing the rechargeable battery wand mount.
Procedures for attaching the shading headrail to the installation brackets.
How to attach an optional dust cover for outside mounts.
Connecting the power source for motorized systems.
Installation instructions for the satellite battery pack.
Instructions for mounting the rechargeable battery wand as a satellite unit.
Inserting the rechargeable battery wand into its mount.
Attaching the SoftTouch wand and making final adjustments.
Connecting the 18V DC power supply.
Steps to test the shading operation with PowerView Gen 3.
General guide to operating the front and rear shading components sequentially.
Instructions for lowering and raising UltraGlide shadings.
Basic operation for SoftTouch motorized shadings.
Advanced operation modes for setting favorite positions.
Guide to using the PowerView App and Gen 3 Remote for control.
Procedures for calibration and shade programming resets.
Common issues like headrail fit and basic operation problems.
Troubleshooting for rechargeable battery recharging and operation.
Addresses issues with bottom rail weight and skew adjustment.
Troubleshooting vane operation and fabric clinging problems.
Adjusting upper and lower limits for SoftTouch shadings.
Instructions on how to safely detach the shading from its brackets.
Guidelines for cleaning the headrail and front shading.
Cleaning the rear shade and properties of Silhouette fabrics.
Critical warning about strangulation hazards from window blind cords.
Statements regarding FCC and Canadian ICES compliance.
Details of the lifetime limited warranty and how to obtain service.
To Next Page
