Hunter 31 - Conventional Standing Rigging

ITEM QTY FITTINGS
1 D3 2 1/4" 6mm T-TERMINAL 308-324 10ft 8 3/4" 3270 mm
FORK 308-417
2 V2 2 1/4" 6mm EYE 308-362 10ft 6" 3200 mm
EYE 308-362
3 D2 2 3/16" 5mm Stemball 308-510-01 10ft 10 1/8" 3305 mm
Stemball Cups 306-572 +573
STD/FRK TB 174-472-06
4 RD2 2 5/32" 4 mm FORK 308-312-01 10ft 6" 3200 mm
STD/T TB 174-472-21
5 V1 2 1/4" 6 mm Fork 308-417 12ft 4 1/8" 3760 mm
STD/TGLE TB 174-324-59
6 D1 2 1/4" 6 mm Stemball 308-512-01 12ft 10 3/8" 3925 mm
Stemball Cup 306-573
STD/TGLE TB 174-324-59
7 RD1 2 5/32" 4 mm FORK 308-312-01 9ft 5 3/4" 2890 mm
STD/T TB 174-472-21
8 F0RESTAY 1 1/4" 6 mm FURLEX 106-12 33ft 3 3/4" 10155 mm
1. ALL ADJUSTABLE RIGGING IS DIMESIONED WITH TURNBUCKLES 2/3 OPEN.
2. LENGTHS DO NOT
INCLUDE SPREADER TIP LINKAGE.
SELDEN MAST SRIG-0120
HUNTER 31 CONVENTIONAL
STANDING RIGGING
WIRE SIZE OVERALL LENGTH
PAGE 50A