Need help?Do you have a question about the Hunter 40170 and is the answer not in the manual?
General| Wi-Fi Connectivity | No |
|---|---|
| Power Source | 2 AA Batteries |
| Programmability | Non-Programmable |
| Stages | 1 |
| Hold Function | Yes |
Steps to turn off power, remove the thermostat cover, and locate wires.
Instructions for labeling wires and safely disconnecting them from the old unit.
Instructions for separating the thermostat's top cover from its base.
Steps for positioning the wall plate, marking, drilling, and mounting it to the wall.
Guide on properly connecting the system wires to the thermostat terminals.
Instructions for configuring the HE/HG and HP/STD switches based on HVAC system type.
Steps for inserting batteries, attaching the cover, and restoring power to the system.
How to adjust the desired temperature and select system operation mode (Cool, Off, Heat).
Explanation of the fan switch operation in AUTO and ON positions.
Describes the weak battery warning and shut-down indicator behavior.
Guide on using the Span Adjust to modify the system's cycling frequency.
Troubleshooting steps for issues like system not turning on/off or staying on.
Information on how to get further help via the website or technical support.
Wiring diagrams for 4-wire and 5-wire conventional heat/cool systems.
Wiring diagrams for single-stage heat pump and 2-wire heat-only systems.
Wiring diagrams for 3-wire heat-only and 3-wire cool-only systems.
To Next Page
