Hunter 44300 - Manual Override of Program

To Review The Current Temperature Setting:
Press
for 2
seconds
or less:
or
■ Current time and temperature
M T W TH F SA SU
SET TEMP HOLD TEMP
89
:
15 68
c
AM
PM
HEAT COOL
1234
FILTER
LO BAT
■ 70 indicates the current setting of
the thermostat is 70°F. 68 shows
the present room temperature as
68°F.
■ If held for more than 2 seconds,
you will manually override your
present temperature to a new
setting as explained below.
M T W TH F SA SU
SET TEMP HOLD TEMP
86
:
70 68
c
AM
PM
HEAT COOL
1234
FILTER
LO BAT
If You Want to Change the Temperature Without Affecting
Your Program:
Press and hold
to raise
temperature.
The new temperature will hold until the next program time is reached.
Press and hold
to lower
temperature.
Manual Override of Program