4
IMPORTANT INFORMATION
This thermostat is designed to work on the following heating and cooling
systems:
Up to 2 Stage Heat/2 Stage Cool Millivolt Systems
Heat Only or Cool Only Systems 2-wire Hydronic Systems
Single and Multi-Stage Heat Pumps AC or Hard-wired
Gas, Electric or Oil Systems
This thermostat is not designed for use with 110V/220 V systems. If you
are unsure of what kind of heating and cooling system you have, please
contact a qualified HVAC Technician for assistance.
INSTALLATION PROCEDURES
TOOLS
This thermostat includes two #8 slotted screws and two wall anchors
for mounting. To install your new thermostat, you will need the following
supplies:
44002-01 R111809
To Next Page
Loading...
