Hunter 44860 - Page 41

41
1. Touch a blank area of the touch screen. SELECT FUNCTION appears.
2. Touch the
or icon. SET SYSTEM MODE appears.
3. Scroll through the settings with the
or sign to select one of the
SYSTEM modes:
HEAT ( icon, red screen) EMHEAT (only for Heat Pump Systems)
AUTO (
and icons) COOL ( icon, blue screen) OFF
(no icon)
4. Touch
to return to the main screen.
The
icon will show on the main screen if the system is heating; the
icon will show if the system is cooling.
NOTE: If the system is running and the or icon is touched on the main screen,
it will return you to the SET SYSTEM MODE screen. Repeat steps 2-4 to make
changes.
5. Toucvh the temperature icon ( ).
6. Touch the
or sign to adjust the temperature.
44002-01 R111809